Matala Koi Clear Vortex Filter V-105

Koi Clear V-105 Vortex Filter One single standard unit suitable for water gardens up to 20 Tons / 5300 Gallons. Versatile and modular application state of the art progressive filtration the Matala filter media with 3-dimensional structure and high free volume easy installation transport friendly. The Koi Clear Unit is available in two different packages: KoiClear 105 Tank and lid only- as a vortex no fittings no media no stand KoiClear 105 Complete Filter w/ 3 Matala – as mechanical biological filtration. Kit includes Tank and lid with 3 layers of Matala media including: 1 x Black Matala Support Grid approx. 33″diameter x 2″ thick 1 x Green Matala Mechanical Filter Layer approx. 35″ diameter x 6″ thick 1 x Blue Matala Biological Filter Layer approx. 38″ diameter x 6″ thick. Features and Benefits: Dimensions: 42-inch diameter x 40 inch tall. Tank Tapers to an approx. 16″ x 16″ square bottom. Koi Clear holds approximately 150 gallons volume. Versatile and Modular Application. Can be as Vortex or as combined Vortex + Filter. One tank can be applied as a single filtration unit. Several tanks can be applied as modules in a multi-chamber filter. State of the Art Progressive Filtration For better step-wise transition from mechanical filtration to bio-filtration. The Matala Filter media with 3-Dimensional Structure and High Free Volume Active self-cleaning vortex flow below and throughout the filter media. Very resistant to clogging. Easily maintained: Top to bottom rinsing. Easy Installation Thanks to the sloped square bottom of the KoiClear105 no extra supports are needed for positioning and equilibration. Transport Friendly. Tanks are fully stackable. Important: the Stand Bulkheads Fittings are all sold Separately. The tank has no holes drilled in it. You must provide holes and fittings. You may use bulkheads or Uni-seals. Typically you will need three fittings 1 One inlet from the pump or from the pond to feed water to the filter. If gravity flow to the filter you will need a 3-inch or 4-inch inlet. A single 4-inch pipe can handle up to 3500 gph by gravity flow to the filter. A single 3-inch pipe can handle only 1800 gph by gravity flow. If pumping to the filter you will need a 2-inch inlet. 2 One outlet returns water to the pond. if gravity flow back to the pond you will need a 4-inch outlet. If the return to pond is gravity flow you can increase flow rate to 4500 gallons per hour only if your 4-inch pipe is less than 5 feet and definitely draining downhill.if pumping back to the pond you will need a 2-inch outlet. * See above flow rates. if pumping back to the pond you will need a 2-inch outlet. * See above flow rates. 3 One drain to clean out the dirty water from bottom of filter tank. if the bottom of the Koi Clear is above grade or in a position where it can drain downhill then you can use a 2″ or 3″ drain fitting with a ball valve or knife valve on outside. Just open the valve and the dirty water will drain downhill. if the bottom of Koi Clear is below grade or in a position where it cannot drain downhill then you must use a sludge pump in the bottom of the Koi Clear to pump out the waste. In many