Hobbywing External UBEC-10A Super Large Current BEC

Consult Your User’s Manual For Exact Parts Listing UBEC is a switch mode DC/DC regulator it outputs a consistent safe voltage for the receiver gyro and servos. Hobbywing 3 Amp UBEC This UBEC is an external switching mode DC-DC regulator; it draws DC voltage from 2-6S Li – Po battery drops it to a voltage level that is suitable for your receivers and other electronic devices and keeps providing the stable current output of 3Amp. Its compatible with different brands of ESCs. – Spec Check: Output Voltage/Current: 5V3A / 6V3A adjust via jumper cap Input Voltage: 5.5-26V 2-6S Li – Po/5-18 Cells NiMH/NiCa Size: 43x17x7mm LxWxH Weight: 11g Ripple: less than 50m – Vp-p 2A/12V input Hobbywing 8 Amp UBEC The 8A-UBEC is a switching-mode DC-DC regulator supplied with a 2-3 cells lithium battery pack and it outputs a consistent safe voltage for your receiver gyro and servos. It is very suitable for nitro powered RC helicopter bigger than 30 class and big fixed-wing aircraft. 1.1 Output Voltage: 5V or 6V Changeable with an output-voltage select switch 1.2 Continuous output current: 8 Amps 1.3 Burst output current: 15 Amps 1.4 Input: 6V-12.6V 2-3 cells lithium battery pack 1.5 Quiescent current: 60m – A 1.6 Size: 42mm*39mm*9mm length*width*height 1.7 Weight: 36g Hobbywing UBEC 10A 6S This UBEC is an external switching mode DC-DC regulator; it draws DC voltage from 2-6S Li – Po battery drops it to a voltage level that is suitable for your receivers and other electronic devices and keeps providing the stable current output of up to 10Amp. As the UBEC has such a powerful output capability so its particularly applicable for large helicopters and fixed-wing aircraft. – Spec Check: Input Voltage: 6V-25.2V 2-6S Li – Po Output Voltage: 5.0V / 6.0V / 7.4V / 8.4V adjustable Output Current Cont. /Peak: 10A/20A Size: 43.1×32.3×12.5mm LxWxH Weight: 36g Hobbywing HV 25A UBEC offers elegance power extended protection features and simplicity all in a compact solution. Hoinside of an aluminum case the UBEC is able to dissipate more head and reduce electromagnetic interference. A high efficiency DC-DC regulator paired with special designed circuitry offers conversion efficiency over 90%. Capable of 25A continuous current the UBEC is the ideal choice for even the most demanding of applications. The UBEC accepts a wide input voltage ranging from 3s 11.1V to 18s 66.6v includes an external switch to power on and off the unit and output voltage is adjustable from 5v 6v 7.4v and 8.4v. UBEC shoot-through protection which prevents the voltage of the main power supply from directly flowing to the output end of the UBEC and causing any damage to the connected electronic device when the UBEC is accidentally damaged plus the protections like over-current output end short-circuit overheat low-voltage cutoff guarantee safety and reliability. – Additionally the UBEC features the ability to connect to a separate 2s Li – Po providing backup in the event that the main power fails. – Specifications:Input Voltage: 3-18s LiPoBackup Input Voltage: 1-2s LiPoOutput Voltage: 5/6/7.4/8.4VOutput Amperage: 25A Cont. | 50A Peak – Weigh